EverSpring Smoke Dectector

SGD$99.00

EverSpring Smoke Dectector SFB812

It is a photoelectric sensor sensitive in detecting smoldering fires.  The detector work with Z-Wave controllers and has a build-in 85dB siren.  When the alarm is sound, it also sent an Z-Wave command to your Z-Wave gateway hence you could be alerted through your smart phone if it is connected.

 

  • Photoelectric sensor particularly effective in detecting smoldering fires
  • Built-in 85dB sounder and flashing red LED will indicate presence of smoke
  • Manual test button help to verify battery status and alarm operation
  • Low battery and sensitivity detection
  • Tamper proof protection
Categories: ,

The photoelectric Smoke Detector is a Z-WaveTM enabled device which is fully compatible with any Z-WaveTM enabled network.  Z-WaveTM enabled devices displaying the Z-WaveTM logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-WaveTM enabled networks.  Inclusion of this detector on other manufacturer’s Wireless Controller menu allows remote operation of connected modules when the detector is triggered.  Z-Wave node in the system also acts as a repeater, so as to re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.

Features

  • Photoelectric sensor particularly effective in detecting smoldering fires
  • Built-in 85dB sounder and flashing red LED will indicate presence of smoke
  • Manual test button help to verify battery status and alarm operation
  • Low battery and sensitivity detection
  • Tamper proof protection
Weight 0.25 kg