Sale!

FIBARO Dimmer 2

SGD$109.00 SGD$95.00

FIBARO Dimmer 2 is a radio controlled light dimming module, designed to work with light sources of any type.  FIBARO Dimmer 2 is an ultra-smart device that recognises the type of connected light source and then automatically calibrates itself.  It can be connected to two-wire or three-wire electrical system, and can switch or dim connected light source either through radio waves or through the wall switch connected.  FIBARO Dimmer 2 is fully compliant with Z-Wave Plus standard and incorporates the Z-Wave chip of the 5th generation.

Product Description

The New Dimension of Intelligent

Using the unique, specially designed algorithm, FIBARO Dimmer 2 recognizes the type of a connected light source and calibrates itself to set proper values. Now you can be sure that lights in your home are controlled in the optimal way.

Dimmer2 Pic1

 

Can be Installed With or Without Neutral Wire

The FIBARO Dimmer 2 is designed in such a way that it can be installed and function even if neutral wire is not available.

 

 

Dimmer2 Pic2

 

Power Metering

The new Dimmer 2 features power metering functionality.  You can view the energy consumption of your home in clear charts and graphs, and use it to reduce your monthly bills.

Dimmer2 Pic3

 

Control Various Light Sources

The Dimmer 2 is an extremely advanced device, the first on the market to offer the possibility to control both the leading edge and the trailing edge. Now you are free to choose a light source and fully control it any way you want.

Dimmer2 Pic4

 

Z-Wave Plus Certified

FIBARO Dimmer 2 is fully compliant with Z-Wave Plus standard and incorporates the Z-Wave chip of the 5th generation.

z-wave_plus

 

New Options

Configure the lights as you wish with Dimmer 2 and the creative use of scenes. Imagine that in the middle of the night you need to go to the kitchen. You turn the lights on and you’re blinded. Sounds familiar? With Dimmer 2 the lights will turn on slightly dimmed, gently illuminating your way.

Dimmer2 Pic5

 

Scene Management

FIBARO Dimmer 2 offers an extremely intuitive scene management. The device will turn one of the light switch buttons into a scene trigger. Activating a selected scene becomes as simple as turning the light on. Just press the button while entering the room!

Dimmer2 Pic6

 

Intelligent Notification

The Dimmer 2 incorporates a number of security features protecting the device from overheating, overload and voltage drop. Should any of these happen, you will be notified immediately.

Dimmer2 Pic7

 

New Intelligent FIBARO Bypass 2

To increase the possibilities of the Dimmer 2 even more, FIBARO have designed the new, microprocessor controlled Bypass 2.  FIBARO Dimmer 2 may require FIBARO Bypass 2 for load less than 50W.  (Note:  Only use FIBARO Bypass 2 FGB-002 with FIBARO Dimmer 2.  Using FIBARO Dimmer 2 with the old Bypass FGB-001 may damage the dimmer).

Dimmer2 Pic8

 

More Convenient Connectors – Easy Installation

The Dimmer 2 is equipped with large connecting terminals which simplify the installation process. You can connect it to wires of a larger diameter and make the installation faster.

Dimmer2 Pic9

 

User Friendly Configuration Menu

The built-in RGB diode is a perfect source of information during the installation process. It will show you when the Dimmer 2 has been included to or excluded from the network. You will see whether the calibration or software update have successfully completed. You can also check the Z-Wave network range.

Dimmer2 Pic10

 

Z-Wave Network Range Tester

Use the Dimmer 2 to test the Z-Wave network range. The built-in RGB diode will help you see if the place in which you chose to install the Dimmer 2 stays within the direct range of the Z-Wave network.

Dimmer2 Pic11

 

Software Update

You can update the software to its new version whenever available. This way you will always benefit from any new functionalities without the need of purchasing new device.

Dimmer2 Pic12

 

Product Specification

  • Power Supply: 220-240V AC 50Hz
  • Power Consumption < 1.3W
  • Operational temperature: 0-35°C
  • Operational current:: 0.25-1.1A
  • Device temperature protection: 105°C
  • Wireless: Z-Wave (868.42MHz)
  • Radio Signal Power: up to 1mW
  • Dimensions (L x W x H): 42.50 x 38.25 x 20.30mm
  • For installation in boxes: ∅ ≥ 50mm

 

Download Manual

Click to download the FIBARO Dimmer 2 manual.